Traffic Lab Model info

What is the difference between a speed limit, desired speed and actual speed?

A speed limit sets the permitted maximum.1 Desired speed is the target in free-flow conditions.2 Actual speed is how fast a vehicle is travelling at a given moment.3

Red and white light trails around a motorway bend at night.
Illustrative photo · Markus Spiske / Unsplash

Three different values in km/h

A road sign reading 100 km/h sets a different rule for a segment than a 120 km/h sign. The German capacity manual uses these posted limits as categories for design. A measurement on the road shows how fast the vehicles are actually travelling.1

What each speed figure describes
ValueMeaning
Speed limitPermitted maximum1
Desired speedFree-flow target2
Actual speedSpeedometer reading3

What the simulator’s speed slider changes

With the slider at 100 km/h, cars on the main approach towards the bridge have individual desired speeds ranging from 88 to just under 114 km/h. The model caps trucks’ free-flow speed at 90 km/h. Vehicles can travel considerably slower when merging or queuing.24

Try it yourself

Start with the desired speed set to 100 km/h. Select a vehicle heading towards the bridge and watch its speed readout on the approach and while it merges.

Sources

  1. Geistefeldt and Hohmann (2024) · BASt V 377, Speed limits in Table 2-6, p. 48 (German) ↩↩2↩3
  2. Traffic Lab · Vehicle model, target calculation in freeSpeed and desiredSpeed ↩↩2↩3
  3. Traffic Lab · Vehicle readout, calculation of actual speed, line 134 ↩↩2
  4. Traffic Lab · Vehicle model, individual speed factor, line 526 ↩