Traffic Lab Model info

How much traffic gets through when four highway lanes narrow to three, two or one?

At a desired speed of 80 km/h, 106, 73 or 38 vehicles pass the three-, two- or one-lane bottleneck in its busiest simulated minute. Four continuous lanes reach 124.1

Aerial view of crossing highways and curved connecting ramps.
Illustrative photo · Emmanuel Appiah / Unsplash

Four approach lanes, four layouts

The table compares the busiest minute of each layout with the busiest minute on four continuous lanes. Vehicles are counted after the bridge in the direction being measured.1

Vehicles in the busiest minute at a desired speed of 80 km/h1
Approach → bridgeVehiclesChange vs. 4 → 4
4 → 41240%
4 → 3106−15%
4 → 273−41%
4 → 138−69%

How the busiest minute is measured

Each run measures 5 minutes after warm-up, with demand of 160 vehicles per minute in each direction. For each layout, the table reports the highest count across rolling 60-second windows in all 3 runs.2

The values show how the layouts differ under the same model conditions. The hourly flow at a particular work zone also depends on its geometry, traffic and measurement period.2

Try it yourself

Compare three, two and one open bridge lanes while keeping four approach lanes. Watch the count for the last minute and the queue before the bridge.

Sources

  1. Traffic Lab · Throughput data at a desired speed of 80 km/h (JSON, peaks.80) ↩↩2↩3
  2. Traffic Lab · Throughput measurement method (German) ↩↩2