Traffic Lab Model info

Can vehicles merge without stopping at a lane drop?

Vehicles can merge while moving, even in heavy traffic. At a congested highway work zone on China’s G36, drivers typically started changing lanes at less than 30 km/h.1

A yellow “Prepare to stop” sign at the approach to roadworks.
Illustrative photo · Ziph / Unsplash

What the field study measured

The study measures speed as each vehicle starts moving sideways. The analysis does not show whether drivers stopped earlier in the queue.1

How often vehicles nearly stopped in the bridge model

Ten vehicle sequences ran in the bridge work zone scenario with three lanes narrowing to one, a desired speed of 60 km/h and a demand of 78 vehicles per minute. Each run included a two-minute warm-up and five minutes of measurement. The analysis covers 847 zipper merges that started during those windows.2

The analysis counts speeds below 1 km/h as very slow. Before the lane change, the observation zone ran from 35 m before to 5 m past the start of each taper. A vehicle can slow almost to a stop in this zone and start moving again by the time it changes lanes. The two percentages describe different moments of the same manoeuvre and cannot be added together.2

Speeds for 847 simulated lane changes2
MeasureResult
Below 1 km/h when the lane change began97 (11.5%)
Below 1 km/h in the observation zone beforehand395 (46.6%)
Median speed at the start of the lane change7.3 km/h

Try it yourself

Start the bridge work zone with three lanes narrowing to one at 60 km/h. Watch when vehicles in the ending lane slow down and how they move into a gap.

Sources

  1. Jiao et al. (2024) · G36 work zones, Sections 3.2 and 4.2.2, Figures 2 and 7 ↩↩2
  2. Traffic Lab · Bridge merge measurement script, model revision b5ba5c8 ↩↩2↩3