Traffic Lab Model info

How much time can a bus save by getting a head start at a traffic light?

The bus uses a short lane to pass the waiting queue, then gets its own green light. In 2021, the transit agency in Washington, D.C. reported up to twelve seconds less delay per intersection.12

Several rows of closely spaced cars beneath a pedestrian bridge.
Illustrative photo · Margo Evardson / Unsplash

How the bus reaches the stop line

One example is at Georgia Avenue and Irving Street in Washington. The bus uses a separate lane to the stop line. Its signal lets it go while the cars beside it still have a red light. It crosses and merges back into traffic on the other side. The combination of a short lane and an early signal is called a queue jump.12

When the head start shrinks

In Washington, drivers turning right can often use the same short lane. If several are waiting to turn, the bus has a harder time getting through. Twelve seconds was the largest reduction in delay the transit agency reported per intersection.12

Zhou and Gan simulated the idea against a signal that gives the bus priority but keeps it in the same queue as cars. In heavy traffic, the separate bypass lane saved the bus more time.3

Test it in the simulator

Open the bus lane in the city model and watch buses and cars cross the junctions.

Sources

  1. District Department of Transportation (2021) · Bus Priority Program Toolbox, section 2.3, p. 14, Fig. 7 ↩↩2↩3
  2. WMATA (18 November 2021) · Bus Transformation Project Update, slide 15 on queue jumps in Washington, D.C. ↩↩2↩3
  3. Zhou and Gan (2009) · Simulation of signal priority with and without a queue jump lane ↩