Traffic Lab Model info

Roundabout or traffic lights?

Send the same vehicles through a roundabout and a junction with traffic lights. Where do drivers turning left wait longer?

Live

Click a vehicle or press Enter to select and follow it. Escape clears the selection.

100 %
Exits
—veh
Total delay
—veh·min
Waiting
—veh

Compare designs

Both designs use the same arrivals and destinations. Each comparison measures 15 minutes. With steady traffic, the run warms up for five minutes first. With a traffic surge, the road starts empty and the measurement includes the surge.

Live measurements

Requested trips
—
Open trips
—
Trip time P95
—
Queue length
—
Longest open wait
—
Stops
—
Inner-lane entries
—
Arrivals and flow over time

What makes drivers wait at each junction?

Drivers enter the roundabout when there’s a big enough gap. Heavy traffic in the circle can make drivers on the next approach wait longer. At the lights, the signal plan determines when each direction gets a green. If the junction is clear, drivers can go through on green.

Choose a dominant approach and heavy left turns. Compare the four approaches individually. The longest wait among open trips includes vehicles that have yet to leave the junction.

Driving parameters are model assumptions. Delay includes waiting before entering the map. For 95% of completed trips, travel time is at or below the P95 value.

The fixed plan gives each axis 18 s for through and right movements and 8 s for protected left turns, with 3 s clearance after each phase. All entries share one lane in the single-lane roundabout. The inner lane merges out to exit in the two-lane design and leads to a dedicated exit in the turbo design. Signals have a separate left-turn pocket. The model tracks motor vehicles.

Dominant demand assigns 65/12/15/8% of arrivals to north/east/south/west. Heavy left turns send 60% of trips left, compared with 24% for mixed turns.

Guide for Roundabouts (NCHRP 1043) · FHWA Signal Timing Manual