# Why can the busiest minute overstate hourly traffic flow?

The busiest minute can carry more traffic than the longer-run average. At a two-to-one lane drop with a desired speed of 80 km/h, extrapolating gives **2,100 vehicles per hour**. The median across three full simulated hours is **1,827 vehicles per hour**.[^1][^2]

[HTML version](https://onemorelane.org/en/faq/why-a-peak-minute-overstates-hourly-traffic-flow/)

![Red and white light trails around a motorway bend at night.](https://onemorelane.org/photos/night-960.webp)

Illustrative photo · [Markus Spiske / Unsplash](https://unsplash.com/photos/djx1-TffiV4)

## What time windows do the figures use?

After a two-minute warm-up, the throughput matrix takes the highest complete 60-second count from five minutes of observation for each sequence (1187 to 1189). The hourly series counts all exits over a full simulated hour after warm-up and takes the middle of the three hourly counts.[^1][^2][^3]

Multiplying by 60 assumes the busiest minute repeats for an entire hour. In this scenario, that gives a figure about **15% above the hourly median**. The difference can vary with the lane layout, speed and demand.[^1][^2]

Two-to-one lane drop with a standard ramp and a desired speed of 80 km/h

| Measure | Throughput |
| --- | ---: |
| Busiest simulated minute[^1] | 35 vehicles/min |
| Busiest minute × 60[^1] | 2,100 vehicles/h |
| Median across three full simulated hours[^2] | 1,827 vehicles/h |

## How one minute can distort an hourly picture

The difference comes from the choice of time window, not from miscounted vehicles. The hourly median also includes quieter minutes. Both figures are correct, but they answer different questions.[^2]

## Try it yourself

Start the one-lane bottleneck and see how the rolling minute count changes at the end of the bridge. This run uses one vehicle sequence.

- [2 → 1 · 80 km/h](https://onemorelane.org/en/highway/?map=highway&preset=custom&seed=1187&lanes=2&exitLanes=1&speed=80&attention=80&demand=160&style=balanced&extended=0)

![Vehicles queue on two approach lanes before the single-lane bridge.](https://onemorelane.org/faq-preview-2-1-80.webp)

## Related questions

- [How does Traffic Lab use studies to calibrate its simulator?](https://onemorelane.org/en/faq/studies-and-traffic-simulation-calibration/index.md)
- [How do three-to-two and two-to-one lane drops compare?](https://onemorelane.org/en/faq/three-to-two-vs-two-to-one-lanes/index.md)
- [How many vehicles can pass a one-lane highway work zone at 80 km/h?](https://onemorelane.org/en/faq/one-lane-highway-work-zone-80-kmh/index.md)

## Sources

[^1]: [Traffic Lab · Throughput dataset, peaks.80, layout 2-1](https://onemorelane.org/capacity-data.json)
[^2]: [Traffic Lab · Hourly measurements after calibration, 2 → 1 with a standard ramp (German)](https://github.com/mb4umi/onemorelane/blob/main/kapazitaetsabgleich.md#stundenmessungen-nach-der-kalibrierung)
[^3]: [Traffic Lab · Hourly measurement script, measure and firstFiveMinutePeak](https://github.com/mb4umi/onemorelane/blob/main/scripts/measure-hourly-flow.mjs)
