# Does a 120 km/h limit carry more traffic than 80 or 100 km/h?

Throughput depends on **vehicle speed and traffic density**.[^1] The German capacity manual gives the same design capacity at 80, 100 and 120 km/h for an example three-lane segment.[^2]

[HTML version](https://onemorelane.org/en/faq/speed-and-traffic-throughput/)

![Red and white light trails around a motorway bend at night.](https://onemorelane.org/photos/night-960.webp)

Illustrative photo · [Markus Spiske / Unsplash](https://unsplash.com/photos/djx1-TffiV4)

## Speed and throughput measure different things

Throughput counts how many vehicles pass a point in a given time. Vehicles can travel faster past the same point while also being spaced farther apart. To determine how many pass, you also need traffic density or a vehicle count.[^1]

## An example from the German capacity manual

For a basic highway segment outside a metropolitan area with three lanes in each direction, a gradient of up to 2% and 10% heavy vehicles, HBS 2015 gives a design capacity of **5,300 vehicles per hour per direction** for speed limits of 80, 100 and 120 km/h. That value assumes dry roads in daylight.[^2]

## Three speed settings in the simulator

The speed control sets the vehicles’ **desired speed**. Their actual speeds depend on traffic conditions. Each row comes from three hour-long model runs on the same road.[^3]

On an open road, a higher desired speed adds few vehicles. Cars travel faster but leave more space. At a bottleneck, what matters is how evenly the queue discharges.

Four continuous lanes without a ramp · median[^3]

| Desired speed | Vehicles/h |
| --- | ---: |
| 80 km/h | 6,946 |
| 100 km/h | 7,196 |
| 120 km/h | 7,352 |

## Try it yourself

Start the three speed settings with four approach lanes and three bridge lanes. Compare the count and the queue.

- [4 → 3 · 80 km/h](https://onemorelane.org/en/highway/?map=highway&preset=custom&seed=1187&lanes=4&exitLanes=3&speed=80&attention=80&demand=160&style=balanced&extended=0)
- [4 → 3 · 100 km/h](https://onemorelane.org/en/highway/?map=highway&preset=custom&seed=1187&lanes=4&exitLanes=3&speed=100&attention=80&demand=160&style=balanced&extended=0)
- [4 → 3 · 120 km/h](https://onemorelane.org/en/highway/?map=highway&preset=custom&seed=1187&lanes=4&exitLanes=3&speed=120&attention=80&demand=160&style=balanced&extended=0)

![Four approach lanes on the simulated highway narrow to a three-lane river bridge.](https://onemorelane.org/faq-preview-4-3-100.webp)

## Related questions

- [What is the difference between a speed limit, desired speed and actual speed?](https://onemorelane.org/en/faq/speed-limit-desired-speed-and-actual-speed/index.md)
- [How do three-to-two and two-to-one lane drops compare?](https://onemorelane.org/en/faq/three-to-two-vs-two-to-one-lanes/index.md)
- [How many vehicles can pass a one-lane highway work zone at 80 km/h?](https://onemorelane.org/en/faq/one-lane-highway-work-zone-80-kmh/index.md)

## Sources

[^1]: [Li and Zhang (2011) · Field measurements of traffic flow and density](https://connected-corridors.berkeley.edu/sites/default/files/Fundamental%20Diagram%20of%20Traffic%20Flow.pdf)
[^2]: [Geistefeldt and Hohmann (2024) · HBS design values, BASt V 377, Table 2-6 (German)](https://bast.opus.hbz-nrw.de/files/2913/V377%2BGesamtversion%2BBF.pdf)
[^3]: [Traffic Lab · Hourly measurements after calibration (German)](https://github.com/mb4umi/onemorelane/blob/main/kapazitaetsabgleich.md#stundenmessungen-nach-der-kalibrierung)
