# How far before a highway work zone do drivers leave the ending lane?

In a German field study, with standard road markings, most lane changes took place **300 to 600 m before the lane drop**. At higher traffic volumes drivers merged later in all three marking layouts studied.[^1]

[HTML version](https://onemorelane.org/en/faq/how-far-before-a-work-zone-do-drivers-merge/)

![Orange traffic cones mark off part of a highway carriageway.](https://onemorelane.org/photos/works-960.webp)

Illustrative photo · [Julia A. Keirns / Unsplash](https://unsplash.com/photos/dA71vYzTgRs)

## Comparing three types of road marking

Andreas Sümmermann studied video footage from three German highway work zones where three lanes narrowed to two. He counted lane changes from the ending left lane to the middle lane. Traffic continued to flow throughout the observations.[^1]

To estimate the average distance, the author assigned each lane change to the midpoint of the stretch where it was observed. He counted changes within the final 800 m. For the shortest opening, the estimated average was still in the stretch marked with a yellow line.[^1]

Estimated average lane-change distance before the lane drop[^1]

| Road marking | Distance |
| --- | ---: |
| No additional yellow line | **399 m** |
| Yellow line with a 300 m opening for lane changes | 244 m |
| Yellow line with a 150 m opening for lane changes | 185 m |

## Where drivers start to merge in a queue

At three lightly trafficked work zone sites on China’s G36, drivers often began changing lanes about 300 m before the taper. At the congested site C1, most lane changes began **within the final 50 m** before the taper. These distances describe the work zones observed.[^2] Distances are only comparable when the reference point is clear: the first sign, the start of the taper or the end of the ending lane. The observed moment matters too, whether it is the first sideways movement, crossing the line or becoming fully established.

## Test it in the simulator

Open the bridge work zone with three lanes narrowing to one and watch where drivers change lanes in the queue.

- [Open the 3 → 1 work zone](https://onemorelane.org/en/highway/?map=highway&preset=custom&seed=1187&lanes=3&exitLanes=1&speed=60&attention=90&demand=78&style=defensive&extended=0)

## Related questions

- [Can vehicles merge without stopping at a lane drop?](https://onemorelane.org/en/faq/can-vehicles-merge-without-stopping/index.md)
- [What happens to vehicle speeds and time gaps when someone merges?](https://onemorelane.org/en/faq/speed-and-time-gaps-when-merging/index.md)
- [Why can traffic flow steadily through a bottleneck and slow down farther back?](https://onemorelane.org/en/faq/steady-bottleneck-flow-and-traffic-waves/index.md)

## Sources

[^1]: [Sümmermann (2012) · RWTH dissertation, Section 5.6.1, pp. 153-156, Figures 5-28 to 5-30 (German)](https://publications.rwth-aachen.de/record/65382/files/4137.pdf)
[^2]: [Jiao et al. (2024) · Merge locations on the G36, Section 4.2.1, Figure 6](https://www.mdpi.com/1999-4893/17/10/450)
