# Can vehicles merge without stopping at a lane drop?

Vehicles can **merge while moving, even in heavy traffic**. At a congested highway work zone on China’s G36, drivers typically started changing lanes at less than 30 km/h.[^1]

[HTML version](https://onemorelane.org/en/faq/can-vehicles-merge-without-stopping/)

![A yellow “Prepare to stop” sign at the approach to roadworks.](https://onemorelane.org/photos/sign-960.webp)

Illustrative photo · [Ziph / Unsplash](https://unsplash.com/photos/90DDwIlTkkI)

## What the field study measured

The study measures speed as each vehicle starts moving sideways. The analysis does not show whether drivers stopped earlier in the queue.[^1]

## How often vehicles nearly stopped in the bridge model

Ten vehicle sequences ran in the bridge work zone scenario with three lanes narrowing to one, a desired speed of 60 km/h and a demand of 78 vehicles per minute. Each run included a two-minute warm-up and five minutes of measurement. The analysis covers 847 zipper merges that started during those windows.[^2]

The analysis counts speeds below 1 km/h as very slow. Before the lane change, the observation zone ran from 35 m before to 5 m past the start of each taper. A vehicle can slow almost to a stop in this zone and start moving again by the time it changes lanes. The two percentages describe different moments of the same manoeuvre and cannot be added together.[^2]

Speeds for 847 simulated lane changes[^2]

| Measure | Result |
| --- | ---: |
| Below 1 km/h when the lane change began | **97 (11.5%)** |
| Below 1 km/h in the observation zone beforehand | 395 (46.6%) |
| Median speed at the start of the lane change | 7.3 km/h |

## Try it yourself

Start the bridge work zone with three lanes narrowing to one at 60 km/h. Watch when vehicles in the ending lane slow down and how they move into a gap.

- [3 → 1 · 60 km/h](https://onemorelane.org/en/highway/?map=highway&preset=roadworks&seed=1187&lanes=3&exitLanes=1&speed=60&attention=90&demand=78&style=defensive&extended=0)

## Related questions

- [How far before a highway work zone do drivers leave the ending lane?](https://onemorelane.org/en/faq/how-far-before-a-work-zone-do-drivers-merge/index.md)
- [What happens to vehicle speeds and time gaps when someone merges?](https://onemorelane.org/en/faq/speed-and-time-gaps-when-merging/index.md)
- [Why can traffic flow steadily through a bottleneck and slow down farther back?](https://onemorelane.org/en/faq/steady-bottleneck-flow-and-traffic-waves/index.md)

## Sources

[^1]: [Jiao et al. (2024) · G36 work zones, Sections 3.2 and 4.2.2, Figures 2 and 7](https://www.mdpi.com/1999-4893/17/10/450)
[^2]: [Traffic Lab · Bridge merge measurement script, model revision b5ba5c8](https://github.com/mb4umi/onemorelane/blob/b5ba5c837a38cdd52f8e036c7f7e3b12785fe746/scripts/measure-merges.mjs#L6-L31)
